This is the latest recevied telemetry packets stored in our database for station/object 9W8SEN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1760515627 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760514727 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760513827 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760512927 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760512027 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760511127 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760510227 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760509327 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760508425 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760507525 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760506625 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760505725 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760504825 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760503925 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760503025 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760502125 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760501225 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760500325 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760499425 | 0.22 VDC | 0 | 0 | 0 | 0 |
| 1760498524 | 0.22 VDC | 0 | 0 | 0 | 0 |
| 1760497624 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760496724 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760495824 | 0.22 VDC | 0 | 0 | 0 | 0 |
| 1760494924 | 0.2 VDC | 0 | 0 | 0 | 0 |
| 1760494024 | 0.2 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)