This is the latest recevied telemetry packets stored in our database for station/object DB6EV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773208460 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773207559 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773206659 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773205759 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773204859 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773203959 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773203059 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773202159 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773201259 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773200359 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773199458 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773198558 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773197658 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773196758 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773195858 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773194958 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773194058 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773193158 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773192258 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773191358 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773190457 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773189557 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773188657 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773187757 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1773186857 | 4.02 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)