This is the latest recevied telemetry packets stored in our database for station/object SP6RJ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751756513 | 489 Count | 16 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1751755913 | 484 Count | 16 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1751755313 | 473 Count | 16 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1751754712 | 468 Count | 16 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1751754112 | 461 Count | 16 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1751753512 | 453 Count | 16 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1751752912 | 447 Count | 16 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1751752311 | 440 Count | 16 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1751751711 | 430 Count | 16 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1751751110 | 423 Count | 16 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1751750517 | 418 Count | 16 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1751749916 | 410 Count | 16 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1751749316 | 404 Count | 16 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1751748716 | 398 Count | 16 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1751748115 | 390 Count | 16 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1751747515 | 383 Count | 16 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1751746914 | 375 Count | 16 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1751746314 | 368 Count | 16 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1751745714 | 360 Count | 16 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1751745113 | 352 Count | 16 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1751744513 | 344 Count | 16 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1751743912 | 339 Count | 16 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1751743312 | 329 Count | 16 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1751742712 | 301 Count | 16 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1751742112 | 295 Count | 16 Count | 0 Count | 4.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)