This is the latest recevied telemetry packets stored in our database for station/object SP6RJ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1760088638 | 944 Count | 29 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1760088038 | 936 Count | 29 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1760087438 | 931 Count | 29 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1760086837 | 924 Count | 29 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1760086237 | 918 Count | 28 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1760085645 | 911 Count | 26 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1760085044 | 904 Count | 24 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1760084444 | 896 Count | 21 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1760083844 | 890 Count | 21 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1760083244 | 881 Count | 17 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1760082643 | 873 Count | 14 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1760082043 | 869 Count | 14 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1760081442 | 859 Count | 12 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1760080841 | 846 Count | 12 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1760080241 | 842 Count | 12 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1760079641 | 833 Count | 12 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1760079041 | 828 Count | 12 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1760078440 | 824 Count | 12 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1760077840 | 819 Count | 12 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1760077239 | 812 Count | 12 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1760076639 | 808 Count | 12 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1760076039 | 801 Count | 12 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1760075438 | 796 Count | 12 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1760074838 | 793 Count | 12 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1760074238 | 788 Count | 12 Count | 0 Count | 4.37 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)