This is the latest recevied telemetry packets stored in our database for station/object ON2ZZT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1781793597 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781791797 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781789997 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781788197 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781786397 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781784597 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781782797 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781780997 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781779197 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781777397 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781775597 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781773797 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781771997 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781770197 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781768397 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781766597 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781764797 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781762997 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781761197 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781759397 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781757597 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781755796 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781753996 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781752196 | 0 VDC | 0 | 0 | 0 | 0 |
| 1781750396 | 0 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)