This is the latest recevied telemetry packets stored in our database for station/object XE2ERA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793196447 | 417 Count | 552 Count | 248 Count | 3.91 VDC | 0.08 VDC |
| 1793195543 | 411 Count | 545 Count | 245 Count | 3.91 VDC | 0.08 VDC |
| 1793194638 | 405 Count | 539 Count | 242 Count | 3.91 VDC | 0.08 VDC |
| 1793193734 | 400 Count | 533 Count | 239 Count | 3.91 VDC | 0.08 VDC |
| 1793192830 | 391 Count | 524 Count | 233 Count | 3.91 VDC | 0.08 VDC |
| 1793191926 | 383 Count | 514 Count | 227 Count | 3.9 VDC | 0.08 VDC |
| 1793191022 | 377 Count | 509 Count | 225 Count | 3.9 VDC | 0.08 VDC |
| 1793190117 | 371 Count | 503 Count | 223 Count | 3.91 VDC | 0.08 VDC |
| 1793189213 | 366 Count | 499 Count | 221 Count | 3.91 VDC | 0.08 VDC |
| 1793188309 | 361 Count | 491 Count | 219 Count | 3.9 VDC | 0.08 VDC |
| 1793187405 | 357 Count | 487 Count | 217 Count | 3.9 VDC | 0.08 VDC |
| 1793186501 | 353 Count | 481 Count | 216 Count | 3.9 VDC | 0.08 VDC |
| 1793185597 | 348 Count | 477 Count | 214 Count | 3.9 VDC | 0.08 VDC |
| 1793184693 | 343 Count | 472 Count | 212 Count | 3.9 VDC | 0.08 VDC |
| 1793183789 | 338 Count | 467 Count | 210 Count | 3.91 VDC | 0.08 VDC |
| 1793182885 | 332 Count | 460 Count | 208 Count | 3.91 VDC | 0.08 VDC |
| 1793181981 | 325 Count | 454 Count | 205 Count | 3.9 VDC | 0.08 VDC |
| 1793181181 | 319 Count | 448 Count | 203 Count | 3.91 VDC | 0.08 VDC |
| 1793180277 | 315 Count | 442 Count | 201 Count | 3.9 VDC | 0.08 VDC |
| 1793179372 | 309 Count | 436 Count | 199 Count | 3.91 VDC | 0.08 VDC |
| 1793178468 | 303 Count | 430 Count | 196 Count | 3.91 VDC | 0.08 VDC |
| 1793177564 | 298 Count | 425 Count | 194 Count | 3.91 VDC | 0.08 VDC |
| 1793176660 | 289 Count | 416 Count | 190 Count | 3.91 VDC | 0.08 VDC |
| 1793175756 | 286 Count | 409 Count | 188 Count | 3.91 VDC | 0.08 VDC |
| 1793174852 | 282 Count | 403 Count | 186 Count | 3.91 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)