This is the latest recevied telemetry packets stored in our database for station/object IU2SKW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757900375 | 69 Pkt/10m | 39 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757896830 | 22 Pkt/10m | 22 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757893286 | 17 Pkt/10m | 16 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757889742 | 44 Pkt/10m | 34 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757886198 | 38 Pkt/10m | 26 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757882654 | 23 Pkt/10m | 19 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757879109 | 27 Pkt/10m | 26 Pkt/10m | 3.82 Volt | 0 | 0 |
| 1757875565 | 22 Pkt/10m | 19 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1757872021 | 25 Pkt/10m | 25 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757868477 | 31 Pkt/10m | 26 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1757864933 | 22 Pkt/10m | 21 Pkt/10m | 3.82 Volt | 0 | 0 |
| 1757861388 | 62 Pkt/10m | 62 Pkt/10m | 3.82 Volt | 0 | 0 |
| 1757857844 | 21 Pkt/10m | 20 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1757854300 | 22 Pkt/10m | 21 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757850756 | 21 Pkt/10m | 19 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1757847212 | 17 Pkt/10m | 16 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757843667 | 17 Pkt/10m | 16 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1757840123 | 33 Pkt/10m | 32 Pkt/10m | 3.82 Volt | 0 | 0 |
| 1757836579 | 42 Pkt/10m | 42 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757833036 | 15 Pkt/10m | 15 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757829491 | 20 Pkt/10m | 20 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757825946 | 16 Pkt/10m | 15 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757822402 | 19 Pkt/10m | 18 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757818858 | 20 Pkt/10m | 20 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1757815314 | 18 Pkt/10m | 15 Pkt/10m | 3.78 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)