This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773598060 | 3.55 VDC | 1.48 VDC | 0 | 0 | 0 |
| 1773596860 | 3.55 VDC | 1.54 VDC | 0 | 0 | 0 |
| 1773595659 | 3.55 VDC | 1.52 VDC | 0 | 0 | 0 |
| 1773594458 | 3.55 VDC | 1.52 VDC | 0 | 0 | 0 |
| 1773593258 | 3.55 VDC | 1.52 VDC | 0 | 0 | 0 |
| 1773590840 | 3.56 VDC | 1.42 VDC | 0 | 0 | 0 |
| 1773589667 | 3.52 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1773588467 | 3.52 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1773587266 | 3.53 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1773586065 | 3.53 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1773584865 | 3.53 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1773583664 | 3.54 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1773582463 | 3.58 VDC | 1.32 VDC | 0 | 0 | 0 |
| 1773581263 | 3.59 VDC | 1.3 VDC | 0 | 0 | 0 |
| 1773580062 | 3.58 VDC | 1.36 VDC | 0 | 0 | 0 |
| 1773578862 | 3.57 VDC | 1.4 VDC | 0 | 0 | 0 |
| 1773577661 | 3.56 VDC | 1 VDC | 0 | 0 | 0 |
| 1773576460 | 3.54 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1773575260 | 3.57 VDC | 1.38 VDC | 0 | 0 | 0 |
| 1773574059 | 3.54 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1773571657 | 3.54 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1773569248 | 3.57 VDC | 1.44 VDC | 0 | 0 | 0 |
| 1773568066 | 3.54 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1773566866 | 3.54 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1773565664 | 3.53 VDC | 0.86 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)