This is the latest recevied telemetry packets stored in our database for station/object 9W2BWS-L. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1729208131 | 3.35 VDC | 0 | 0 | 0 | 0 |
1729208118 | 3.36 VDC | 0 | 0 | 0 | 0 |
1729208102 | 3.38 VDC | 0 | 0 | 0 | 0 |
1729207245 | 3.37 VDC | 0 | 0 | 0 | 0 |
1729207049 | 3.39 VDC | 0 | 0 | 0 | 0 |
1729207001 | 3.39 VDC | 0 | 0 | 0 | 0 |
1729206101 | 3.4 VDC | 0 | 0 | 0 | 0 |
1729205201 | 3.42 VDC | 0 | 0 | 0 | 0 |
1729204300 | 3.44 VDC | 0 | 0 | 0 | 0 |
1729203400 | 3.46 VDC | 0 | 0 | 0 | 0 |
1729202500 | 3.48 VDC | 0 | 0 | 0 | 0 |
1729201600 | 3.49 VDC | 0 | 0 | 0 | 0 |
1729200700 | 3.51 VDC | 0 | 0 | 0 | 0 |
1729199800 | 3.54 VDC | 0 | 0 | 0 | 0 |
1729198900 | 3.55 VDC | 0 | 0 | 0 | 0 |
1729197999 | 3.59 VDC | 0 | 0 | 0 | 0 |
1729196199 | 3.61 VDC | 0 | 0 | 0 | 0 |
1729195299 | 3.62 VDC | 0 | 0 | 0 | 0 |
1729194399 | 3.64 VDC | 0 | 0 | 0 | 0 |
1729193499 | 3.64 VDC | 0 | 0 | 0 | 0 |
1729192599 | 3.65 VDC | 0 | 0 | 0 | 0 |
1729191699 | 3.66 VDC | 0 | 0 | 0 | 0 |
1729190799 | 3.67 VDC | 0 | 0 | 0 | 0 |
1729189899 | 3.68 VDC | 0 | 0 | 0 | 0 |
1729188999 | 3.7 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)