This is the latest recevied telemetry packets stored in our database for station/object DO1HFS-30. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766162692 | 5.08 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1766161792 | 5.07 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1766160892 | 4.98 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1766159992 | 5.07 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1766159092 | 4.99 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1766158192 | 5.07 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1766157292 | 5.08 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1766156392 | 5.08 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1766155492 | 5.07 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1766154592 | 5.07 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1766153691 | 5 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1766152848 | 5.07 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1766151948 | 5.08 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1766151048 | 5.02 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1766150148 | 5.07 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1766149248 | 5.07 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1766148347 | 5.08 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1766147447 | 5.07 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1766146547 | 5.08 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1766145647 | 5.04 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1766144747 | 5.07 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1766143847 | 5.08 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1766142947 | 5.08 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1766142047 | 5.07 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1766141147 | 5.08 VDC | 0.82 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)