This is the latest recevied telemetry packets stored in our database for station/object 2M0JUM-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795301783 | 635 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795301180 | 634 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795300577 | 633 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795299974 | 632 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795299371 | 631 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795298768 | 630 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795298165 | 629 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795297561 | 628 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795296958 | 627 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795296355 | 626 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795295752 | 625 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795295149 | 624 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795294546 | 623 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795293943 | 622 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795293340 | 621 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795292737 | 620 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795292134 | 619 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795291531 | 618 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795290928 | 617 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795290325 | 616 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795289722 | 615 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795289119 | 614 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795288626 | 613 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795288023 | 612 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
| 1795287420 | 611 Count | 60 Count | 23 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)