This is the latest recevied telemetry packets stored in our database for station/object IR2UDW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1730779849 | 0.45 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1730778949 | 0.39 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1730778049 | 0.46 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1730777149 | 0.46 VDC | 1 VDC | 0 | 0 | 0 |
| 1730776249 | 0.4 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1730775349 | 0.38 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1730774449 | 0.47 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1730773549 | 0.42 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1730772647 | 0.38 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1730771747 | 0.38 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1730770847 | 0.41 VDC | 1.06 VDC | 0 | 0 | 0 |
| 1730769947 | 0.43 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1730769047 | 0.35 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1730768147 | 0.38 VDC | 1.08 VDC | 0 | 0 | 0 |
| 1730767247 | 0.41 VDC | 1.08 VDC | 0 | 0 | 0 |
| 1730766347 | 0.47 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1730765447 | 0.39 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1730764547 | 0.47 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1730763647 | 0.46 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1730762746 | 0.44 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1730761846 | 0.4 VDC | 1.06 VDC | 0 | 0 | 0 |
| 1730760946 | 0.41 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1730760046 | 0.41 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1730759146 | 0.47 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1730758246 | 0.39 VDC | 1.1 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)