This is the latest recevied telemetry packets stored in our database for station/object SP8SD-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788974439 | 570 Count | 469 Count | 422 Count | 0.28 VDC | 3.14 VDC |
| 1788974138 | 568 Count | 467 Count | 421 Count | 0.28 VDC | 3.14 VDC |
| 1788973838 | 561 Count | 461 Count | 415 Count | 0.28 VDC | 1.56 VDC |
| 1788973537 | 558 Count | 459 Count | 413 Count | 0.28 VDC | 3.14 VDC |
| 1788973236 | 556 Count | 457 Count | 412 Count | 0.28 VDC | 3.14 VDC |
| 1788972936 | 549 Count | 451 Count | 406 Count | 0.28 VDC | 2.12 VDC |
| 1788972635 | 546 Count | 449 Count | 404 Count | 0.28 VDC | 3.14 VDC |
| 1788972334 | 543 Count | 446 Count | 402 Count | 0.28 VDC | 3.14 VDC |
| 1788972034 | 537 Count | 441 Count | 397 Count | 0.28 VDC | 3.14 VDC |
| 1788971733 | 534 Count | 439 Count | 395 Count | 0.28 VDC | 3.14 VDC |
| 1788971433 | 531 Count | 436 Count | 393 Count | 0.28 VDC | 2.98 VDC |
| 1788971132 | 525 Count | 431 Count | 388 Count | 0.28 VDC | 3.14 VDC |
| 1788970831 | 522 Count | 429 Count | 386 Count | 0.28 VDC | 3.14 VDC |
| 1788970531 | 519 Count | 426 Count | 384 Count | 0.28 VDC | 1.76 VDC |
| 1788970230 | 513 Count | 421 Count | 379 Count | 0.28 VDC | 3.14 VDC |
| 1788969930 | 511 Count | 420 Count | 378 Count | 0.28 VDC | 3.14 VDC |
| 1788969629 | 508 Count | 417 Count | 376 Count | 0.28 VDC | 3.14 VDC |
| 1788969328 | 505 Count | 415 Count | 374 Count | 0.28 VDC | 3.14 VDC |
| 1788969027 | 503 Count | 414 Count | 373 Count | 0.28 VDC | 1.68 VDC |
| 1788968727 | 500 Count | 411 Count | 371 Count | 0.28 VDC | 3.14 VDC |
| 1788968426 | 493 Count | 405 Count | 365 Count | 0.28 VDC | 3.14 VDC |
| 1788968126 | 490 Count | 403 Count | 363 Count | 0.28 VDC | 3.14 VDC |
| 1788967825 | 488 Count | 401 Count | 362 Count | 0.28 VDC | 3.14 VDC |
| 1788967524 | 481 Count | 395 Count | 356 Count | 0.28 VDC | 3.14 VDC |
| 1788967224 | 478 Count | 393 Count | 354 Count | 0.28 VDC | 3.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)