This is the latest recevied telemetry packets stored in our database for station/object EB5CGD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766316018 | 0 Count | 220 Count | 0 Count | 0 VDC | 0 VDC |
| 1766314818 | 0 Count | 139 Count | 0 Count | 0 VDC | 0 VDC |
| 1766313619 | 0 Count | 58 Count | 0 Count | 0 VDC | 0 VDC |
| 1766312419 | 0 Count | 1002 Count | 0 Count | 0 VDC | 0 VDC |
| 1766311219 | 0 Count | 939 Count | 0 Count | 0 VDC | 0 VDC |
| 1766310019 | 0 Count | 861 Count | 0 Count | 0 VDC | 0 VDC |
| 1766308819 | 0 Count | 808 Count | 0 Count | 0 VDC | 0 VDC |
| 1766307619 | 0 Count | 742 Count | 0 Count | 0 VDC | 0 VDC |
| 1766306419 | 0 Count | 662 Count | 0 Count | 0 VDC | 0 VDC |
| 1766305219 | 0 Count | 612 Count | 0 Count | 0 VDC | 0 VDC |
| 1766304019 | 0 Count | 558 Count | 0 Count | 0 VDC | 0 VDC |
| 1766302819 | 0 Count | 511 Count | 0 Count | 0 VDC | 0 VDC |
| 1766301619 | 0 Count | 451 Count | 0 Count | 0 VDC | 0 VDC |
| 1766300418 | 0 Count | 389 Count | 0 Count | 0 VDC | 0 VDC |
| 1766299218 | 0 Count | 320 Count | 0 Count | 0 VDC | 0 VDC |
| 1766298018 | 0 Count | 258 Count | 0 Count | 0 VDC | 0 VDC |
| 1766296818 | 0 Count | 194 Count | 0 Count | 0 VDC | 0 VDC |
| 1766295618 | 0 Count | 133 Count | 0 Count | 0 VDC | 0 VDC |
| 1766294418 | 0 Count | 101 Count | 0 Count | 0 VDC | 0 VDC |
| 1766293218 | 0 Count | 65 Count | 0 Count | 0 VDC | 0 VDC |
| 1766265317 | 0 Count | 65 Count | 0 Count | 0 VDC | 0 VDC |
| 1766264116 | 0 Count | 1003 Count | 0 Count | 0 VDC | 0 VDC |
| 1766262916 | 0 Count | 947 Count | 0 Count | 0 VDC | 0 VDC |
| 1766261716 | 0 Count | 856 Count | 0 Count | 0 VDC | 0 VDC |
| 1766260516 | 0 Count | 792 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)