EA2RCF LoRa APRS MAP

My position About Go to BACKUP map Powered by EA2RCF Radioclub Foronda ☰

reset

SQ2MO-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ2MO-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	TX*	RX*	Digi*
1769942709	12 Count	83 Count	9 Count
1769941508	9 Count	62 Count	7 Count
1769940307	6 Count	42 Count	5 Count
1769939107	3 Count	22 Count	3 Count
1769937906	206 Count	1009 Count	157 Count
1769936706	203 Count	989 Count	155 Count
1769935505	200 Count	965 Count	153 Count
1769934304	197 Count	949 Count	151 Count
1769933103	193 Count	927 Count	148 Count
1769931903	190 Count	902 Count	146 Count
1769930702	186 Count	881 Count	143 Count
1769929502	181 Count	860 Count	139 Count
1769928301	175 Count	827 Count	134 Count
1769927101	170 Count	804 Count	130 Count
1769925900	166 Count	779 Count	127 Count
1769924709	156 Count	753 Count	122 Count
1769923509	151 Count	726 Count	118 Count
1769922308	146 Count	702 Count	114 Count
1769921107	140 Count	674 Count	109 Count
1769919907	135 Count	652 Count	105 Count
1769918706	130 Count	630 Count	101 Count
1769917505	125 Count	608 Count	97 Count
1769916305	120 Count	582 Count	93 Count
1769915104	116 Count	558 Count	90 Count
1769913904	112 Count	535 Count	87 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)