This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762370952 | 31 Count | 302 Count | 15 Count | 4.09 VDC | 0 VDC |
| 1762370053 | 28 Count | 274 Count | 13 Count | 4.09 VDC | 0 VDC |
| 1762369153 | 27 Count | 259 Count | 13 Count | 4.09 VDC | 0 VDC |
| 1762368253 | 24 Count | 234 Count | 11 Count | 4.09 VDC | 0 VDC |
| 1762367353 | 18 Count | 202 Count | 10 Count | 4.09 VDC | 0 VDC |
| 1762366453 | 16 Count | 180 Count | 9 Count | 4.09 VDC | 0 VDC |
| 1762365554 | 14 Count | 159 Count | 8 Count | 4.09 VDC | 0 VDC |
| 1762364654 | 12 Count | 124 Count | 7 Count | 4.09 VDC | 0 VDC |
| 1762363754 | 10 Count | 103 Count | 6 Count | 4.1 VDC | 0 VDC |
| 1762362853 | 7 Count | 81 Count | 4 Count | 4.1 VDC | 0 VDC |
| 1762361954 | 6 Count | 62 Count | 4 Count | 4.1 VDC | 0 VDC |
| 1762361056 | 3 Count | 43 Count | 2 Count | 4.1 VDC | 0 VDC |
| 1762360154 | 2 Count | 21 Count | 2 Count | 4.1 VDC | 0 VDC |
| 1762359255 | 160 Count | 1030 Count | 84 Count | 4.1 VDC | 0 VDC |
| 1762358355 | 157 Count | 997 Count | 82 Count | 4.1 VDC | 0 VDC |
| 1762356555 | 113 Count | 840 Count | 58 Count | 4.1 VDC | 0.16 VDC |
| 1762355655 | 111 Count | 809 Count | 57 Count | 4.11 VDC | 4.26 VDC |
| 1762354755 | 108 Count | 787 Count | 55 Count | 4.11 VDC | 4.32 VDC |
| 1762353856 | 105 Count | 760 Count | 53 Count | 4.11 VDC | 5.38 VDC |
| 1762352956 | 104 Count | 741 Count | 53 Count | 4.11 VDC | 5.38 VDC |
| 1762352056 | 101 Count | 725 Count | 51 Count | 4.11 VDC | 5.38 VDC |
| 1762351156 | 100 Count | 707 Count | 51 Count | 4.11 VDC | 5.38 VDC |
| 1762350257 | 97 Count | 668 Count | 49 Count | 4.11 VDC | 5.38 VDC |
| 1762349357 | 95 Count | 642 Count | 48 Count | 4.11 VDC | 5.4 VDC |
| 1762348457 | 93 Count | 617 Count | 47 Count | 4.11 VDC | 5.4 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)