This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791143189 | 10 Count | 203 Count | 6 Count | 4.3 VDC | 0 VDC |
| 1791142289 | 9 Count | 166 Count | 6 Count | 4.31 VDC | 0 VDC |
| 1791141389 | 5 Count | 120 Count | 3 Count | 4.31 VDC | 0 VDC |
| 1791140490 | 4 Count | 81 Count | 3 Count | 4.31 VDC | 0 VDC |
| 1791139591 | 0 Count | 43 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1791138691 | 68 Count | 1011 Count | 45 Count | 4.31 VDC | 0 VDC |
| 1791137790 | 64 Count | 963 Count | 42 Count | 4.31 VDC | 0 VDC |
| 1791136891 | 63 Count | 927 Count | 42 Count | 4.31 VDC | 0 VDC |
| 1791135991 | 59 Count | 890 Count | 39 Count | 4.32 VDC | 0 VDC |
| 1791135091 | 58 Count | 860 Count | 39 Count | 4.31 VDC | 0 VDC |
| 1791134192 | 54 Count | 822 Count | 36 Count | 4.32 VDC | 0 VDC |
| 1791133291 | 53 Count | 789 Count | 36 Count | 4.32 VDC | 0 VDC |
| 1791132392 | 51 Count | 751 Count | 35 Count | 4.32 VDC | 0 VDC |
| 1791131492 | 50 Count | 701 Count | 35 Count | 4.32 VDC | 1.16 VDC |
| 1791130593 | 47 Count | 659 Count | 33 Count | 4.32 VDC | 3.16 VDC |
| 1791129693 | 46 Count | 631 Count | 33 Count | 4.32 VDC | 4.56 VDC |
| 1791128793 | 43 Count | 590 Count | 31 Count | 4.32 VDC | 4.54 VDC |
| 1791127894 | 42 Count | 559 Count | 31 Count | 4.32 VDC | 4.54 VDC |
| 1791126994 | 38 Count | 517 Count | 28 Count | 4.32 VDC | 5.62 VDC |
| 1791126095 | 37 Count | 484 Count | 28 Count | 4.32 VDC | 5.62 VDC |
| 1791125195 | 33 Count | 454 Count | 25 Count | 4.32 VDC | 5.62 VDC |
| 1791124295 | 32 Count | 428 Count | 25 Count | 4.32 VDC | 5.62 VDC |
| 1791123396 | 28 Count | 392 Count | 22 Count | 4.32 VDC | 5.64 VDC |
| 1791122495 | 22 Count | 321 Count | 17 Count | 4.32 VDC | 5.64 VDC |
| 1791121596 | 10 Count | 244 Count | 6 Count | 4.32 VDC | 5.64 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)