This is the latest recevied telemetry packets stored in our database for station/object EA5GU-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789230269 | 0 Count | 989 Count | 0 Count | 0 VDC | 0 VDC |
| 1789228469 | 0 Count | 933 Count | 0 Count | 0 VDC | 0 VDC |
| 1789226669 | 0 Count | 871 Count | 0 Count | 0 VDC | 0 VDC |
| 1789224868 | 0 Count | 814 Count | 0 Count | 0 VDC | 0 VDC |
| 1789223068 | 0 Count | 761 Count | 0 Count | 0 VDC | 0 VDC |
| 1789221268 | 0 Count | 708 Count | 0 Count | 0 VDC | 0 VDC |
| 1789219468 | 0 Count | 655 Count | 0 Count | 0 VDC | 0 VDC |
| 1789217668 | 0 Count | 599 Count | 0 Count | 0 VDC | 0 VDC |
| 1789215868 | 0 Count | 547 Count | 0 Count | 0 VDC | 0 VDC |
| 1789214069 | 0 Count | 491 Count | 0 Count | 0 VDC | 0 VDC |
| 1789212268 | 0 Count | 429 Count | 0 Count | 0 VDC | 0 VDC |
| 1789210468 | 0 Count | 365 Count | 0 Count | 0 VDC | 0 VDC |
| 1789208668 | 0 Count | 311 Count | 0 Count | 0 VDC | 0 VDC |
| 1789206868 | 0 Count | 260 Count | 0 Count | 0 VDC | 0 VDC |
| 1789205068 | 0 Count | 193 Count | 0 Count | 0 VDC | 0 VDC |
| 1789203268 | 0 Count | 126 Count | 0 Count | 0 VDC | 0 VDC |
| 1789201467 | 0 Count | 66 Count | 0 Count | 0 VDC | 0 VDC |
| 1789199667 | 8 Count | 1043 Count | 0 Count | 0 VDC | 0 VDC |
| 1789197867 | 8 Count | 932 Count | 0 Count | 0 VDC | 0 VDC |
| 1789196067 | 8 Count | 870 Count | 0 Count | 0 VDC | 0 VDC |
| 1789194267 | 8 Count | 814 Count | 0 Count | 0 VDC | 0 VDC |
| 1789190670 | 8 Count | 744 Count | 0 Count | 0 VDC | 0 VDC |
| 1789188870 | 8 Count | 706 Count | 0 Count | 0 VDC | 0 VDC |
| 1789187070 | 8 Count | 678 Count | 0 Count | 0 VDC | 0 VDC |
| 1789185270 | 8 Count | 645 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)