This is the latest recevied telemetry packets stored in our database for station/object DH5WR-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757933266 | 23.5 C | 61.87 % | 1020.63 hPa | 0 | 0 |
| 1757931460 | 23.4 C | 61.49 % | 1020.63 hPa | 0 | 0 |
| 1757929654 | 22 C | 64.23 % | 1021.5 hPa | 0 | 0 |
| 1757927848 | 22 C | 64.94 % | 1020.88 hPa | 0 | 0 |
| 1757926042 | 20.7 C | 70.99 % | 1020.25 hPa | 0 | 0 |
| 1757924236 | 19.9 C | 73.14 % | 1020.13 hPa | 0 | 0 |
| 1757922430 | 19.2 C | 74.93 % | 1020 hPa | 0 | 0 |
| 1757920624 | 18.2 C | 78.12 % | 1020 hPa | 0 | 0 |
| 1757919254 | 18.2 C | 76.63 % | 1019.88 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)