This is the latest recevied telemetry packets stored in our database for station/object IZ5HQB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1751644873 | 4.26 VDC | 10.78 VDC | 0 | 0 | 0 |
| 1751644852 | 4.27 VDC | 11.04 VDC | 0 | 0 | 0 |
| 1751644813 | 4.27 VDC | 11.02 VDC | 0 | 0 | 0 |
| 1751644781 | 4.26 VDC | 11.1 VDC | 0 | 0 | 0 |
| 1751644761 | 4.27 VDC | 11.1 VDC | 0 | 0 | 0 |
| 1751644741 | 4.27 VDC | 11.12 VDC | 0 | 0 | 0 |
| 1751644721 | 4.26 VDC | 11.1 VDC | 0 | 0 | 0 |
| 1751644697 | 4.27 VDC | 10.98 VDC | 0 | 0 | 0 |
| 1751644678 | 4.26 VDC | 10.66 VDC | 0 | 0 | 0 |
| 1751644655 | 4.26 VDC | 11.06 VDC | 0 | 0 | 0 |
| 1751644634 | 4.26 VDC | 11.2 VDC | 0 | 0 | 0 |
| 1751644611 | 4.27 VDC | 11.14 VDC | 0 | 0 | 0 |
| 1751644590 | 4.27 VDC | 11.26 VDC | 0 | 0 | 0 |
| 1751644562 | 4.26 VDC | 11.26 VDC | 0 | 0 | 0 |
| 1751644540 | 4.26 VDC | 11.26 VDC | 0 | 0 | 0 |
| 1751644517 | 4.26 VDC | 11.28 VDC | 0 | 0 | 0 |
| 1751644497 | 4.26 VDC | 11.32 VDC | 0 | 0 | 0 |
| 1751643973 | 4.26 VDC | 11.1 VDC | 0 | 0 | 0 |
| 1751643073 | 4.26 VDC | 11.4 VDC | 0 | 0 | 0 |
| 1751642173 | 4.26 VDC | 11.54 VDC | 0 | 0 | 0 |
| 1751641273 | 4.26 VDC | 11.7 VDC | 0 | 0 | 0 |
| 1751640373 | 4.26 VDC | 11.74 VDC | 0 | 0 | 0 |
| 1751639473 | 4.26 VDC | 11.74 VDC | 0 | 0 | 0 |
| 1751638573 | 4.25 VDC | 11.76 VDC | 0 | 0 | 0 |
| 1751637673 | 4.26 VDC | 11.8 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)