This is the latest recevied telemetry packets stored in our database for station/object SM0YOS-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757945974 | 4.3 | 0 | 0 | 0 | 0 |
| 1757945070 | 4.31 | 0 | 0 | 0 | 0 |
| 1757944166 | 4.32 | 0 | 0 | 0 | 0 |
| 1757943262 | 4.33 | 0 | 0 | 0 | 0 |
| 1757942358 | 4.34 | 0 | 0 | 0 | 0 |
| 1757941454 | 4.36 | 0 | 0 | 0 | 0 |
| 1757940550 | 4.37 | 0 | 0 | 0 | 0 |
| 1757939646 | 4.38 | 0 | 0 | 0 | 0 |
| 1757937838 | 4.4 | 0 | 0 | 0 | 0 |
| 1757936934 | 4.41 | 0 | 0 | 0 | 0 |
| 1757936030 | 4.42 | 0 | 0 | 0 | 0 |
| 1757935126 | 4.43 | 0 | 0 | 0 | 0 |
| 1757934405 | 4.44 | 0 | 0 | 0 | 0 |
| 1757933502 | 4.45 | 0 | 0 | 0 | 0 |
| 1757932597 | 4.47 | 0 | 0 | 0 | 0 |
| 1757931609 | 4.48 | 0 | 0 | 0 | 0 |
| 1757931485 | 4.49 | 0 | 0 | 0 | 0 |
| 1757931321 | 4.49 | 0 | 0 | 0 | 0 |
| 1757930920 | 4.5 | 0 | 0 | 0 | 0 |
| 1757930810 | 4.5 | 0 | 0 | 0 | 0 |
| 1757930686 | 4.5 | 0 | 0 | 0 | 0 |
| 1757930662 | 4.5 | 0 | 0 | 0 | 0 |
| 1757930569 | 4.51 | 0 | 0 | 0 | 0 |
| 1757930313 | 4.51 | 0 | 0 | 0 | 0 |
| 1757930287 | 4.51 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)