This is the latest recevied telemetry packets stored in our database for station/object DO6GZ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1761333156 | 3.94 V | 16 | 0 | 0 | 0 |
| 1761333039 | 3.86 V | 16 | 0 | 0 | 0 |
| 1761332920 | 3.94 V | 14 | 0 | 0 | 0 |
| 1761307155 | 3.95 V | 24 | 0 | 0 | 0 |
| 1761307038 | 3.89 V | 27 | 0 | 0 | 0 |
| 1761294100 | 4.01 V | 38 | 0 | 0 | 0 |
| 1761293981 | 4 V | 34 | 0 | 0 | 0 |
| 1761292332 | 3.96 V | 30 | 0 | 0 | 0 |
| 1761280462 | 4.12 V | 26 | 0 | 0 | 0 |
| 1761280343 | 4.14 V | 29 | 0 | 0 | 0 |
| 1761280226 | 4.14 V | 28 | 0 | 0 | 0 |
| 1761280109 | 4.14 V | 27 | 0 | 0 | 0 |
| 1761279990 | 4.15 V | 27 | 0 | 0 | 0 |
| 1761279873 | 4.11 V | 27 | 0 | 0 | 0 |
| 1761279754 | 4.11 V | 29 | 0 | 0 | 0 |
| 1761279637 | 4.18 V | 25 | 0 | 0 | 0 |
| 1761279520 | 4.19 V | 27 | 0 | 0 | 0 |
| 1761279401 | 4.19 V | 29 | 0 | 0 | 0 |
| 1761279284 | 4.21 V | 24 | 0 | 0 | 0 |
| 1761279165 | 4.21 V | 19 | 0 | 0 | 0 |
| 1761279048 | 4.21 V | 15 | 0 | 0 | 0 |
| 1761278931 | 4.22 V | 13 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0.01
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)