This is the latest recevied telemetry packets stored in our database for station/object SP9BJV-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | current* | temp* | humidity* | v batt* | v cpu* |
---|---|---|---|---|---|
1726706589 | 0.02 mA | 9 C | 99 % | 0.16 V | 3.61 V |
1726705676 | 0.02 mA | 9 C | 99 % | 0.16 V | 3.61 V |
1726694719 | 0.02 mA | 11 C | 99 % | 0.14 V | 3.53 V |
1726692879 | 0.02 mA | 12 C | 99 % | 0.16 V | 3.61 V |
1726691964 | 0.05 mA | 12 C | 99 % | 0.16 V | 3.61 V |
1726691061 | 0.93 mA | 12 C | 99 % | 0.16 V | 3.61 V |
1726690525 | 0.02 mA | 13 C | 92 % | 0.16 V | 3.59 V |
1726687396 | 0.02 mA | 15 C | 68 % | 0.16 V | 3.61 V |
1726685786 | 0.99 mA | 14 C | 77 % | 0.16 V | 3.59 V |
1726685562 | 0.02 mA | 15 C | 77 % | 0.16 V | 3.62 V |
1726683733 | 0.05 mA | 15 C | 76 % | 0.16 V | 3.62 V |
1726681901 | 0.02 mA | 15 C | 74 % | 0.19 V | 3.62 V |
1726679160 | 0.02 mA | 17 C | 71 % | 0.19 V | 3.62 V |
1726678238 | 0.02 mA | 18 C | 67 % | 0.19 V | 3.62 V |
1726676391 | 0.05 mA | 21 C | 46 % | 0.19 V | 3.62 V |
1726675490 | 0.88 mA | 23 C | 37 % | 0.19 V | 3.62 V |
1726674559 | 0.02 mA | 26 C | 25 % | 0.19 V | 3.62 V |
1726671745 | 0.02 mA | 31 C | 13 % | 0.19 V | 3.58 V |
1726669033 | 0.02 mA | 19 C | 42 % | 0.19 V | 3.62 V |
1726659790 | 0.02 mA | 37 C | 0 % | 0.24 V | 3.62 V |
1726655168 | 0.05 mA | 26 C | 25 % | 0.19 V | 3.62 V |
1726652396 | 0.02 mA | 24 C | 34 % | 0.19 V | 3.62 V |
1726650566 | 0.02 mA | 23 C | 39 % | 0.19 V | 3.62 V |
1726644135 | 0.02 mA | 18 C | 67 % | 0.19 V | 3.61 V |
1726642298 | 0.02 mA | 15 C | 91 % | 0.16 V | 3.61 V |
*Used Equation Coefficients:
current: 0, 0.01569, 0
temp: 0, 1, -128
humidity: 0, 1, 0
v batt: 0, 0.02353, 0
v cpu: 0, 0.01569, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)