This is the latest recevied telemetry packets stored in our database for station/object 9W2KHN-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1729253491 | 3.78 VDC | 0 | 0 | 0 | 0 |
1729253161 | 3.77 VDC | 0 | 0 | 0 | 0 |
1729252778 | 3.76 VDC | 0 | 0 | 0 | 0 |
1729252484 | 3.75 VDC | 0 | 0 | 0 | 0 |
1729252285 | 3.74 VDC | 0 | 0 | 0 | 0 |
1729251868 | 3.71 VDC | 0 | 0 | 0 | 0 |
1729245814 | 3.59 VDC | 0 | 0 | 0 | 0 |
1729241906 | 3.63 VDC | 0 | 0 | 0 | 0 |
1729241712 | 3.62 VDC | 0 | 0 | 0 | 0 |
1729240542 | 3.54 VDC | 0 | 0 | 0 | 0 |
1729238590 | 3.53 VDC | 0 | 0 | 0 | 0 |
1729237875 | 3.45 VDC | 0 | 0 | 0 | 0 |
1729237636 | 3.39 VDC | 0 | 0 | 0 | 0 |
1729234507 | 3.32 VDC | 0 | 0 | 0 | 0 |
1729228952 | 3.55 VDC | 0 | 0 | 0 | 0 |
1729228620 | 3.54 VDC | 0 | 0 | 0 | 0 |
1729228196 | 3.52 VDC | 0 | 0 | 0 | 0 |
1729227901 | 3.49 VDC | 0 | 0 | 0 | 0 |
1729227051 | 3.33 VDC | 0 | 0 | 0 | 0 |
1729216223 | 3.52 VDC | 0 | 0 | 0 | 0 |
1729215916 | 3.49 VDC | 0 | 0 | 0 | 0 |
1729215695 | 3.47 VDC | 0 | 0 | 0 | 0 |
1729215071 | 3.33 VDC | 0 | 0 | 0 | 0 |
1729214811 | 3.15 VDC | 0 | 0 | 0 | 0 |
1729175473 | 3.5 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)