This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1783378861 | 3.61 VDC | 23.2 C | 894.88 hPa | 0 | 0 |
| 1783378798 | 3.61 VDC | 23.2 C | 954.5 hPa | 0 | 0 |
| 1783378735 | 3.61 VDC | 23.2 C | 990 hPa | 0 | 0 |
| 1783378672 | 3.61 VDC | 23.2 C | 1002 hPa | 0 | 0 |
| 1783378570 | 3.61 VDC | 23.2 C | 1012.13 hPa | 0 | 0 |
| 1783378223 | 3.62 VDC | 23.3 C | 1015.63 hPa | 0 | 0 |
| 1783377320 | 3.62 VDC | 23.2 C | 1016 hPa | 0 | 0 |
| 1783376417 | 3.63 VDC | 23.3 C | 1015.5 hPa | 0 | 0 |
| 1783375514 | 3.63 VDC | 23.5 C | 1016.5 hPa | 0 | 0 |
| 1783374611 | 3.64 VDC | 23.7 C | 1015 hPa | 0 | 0 |
| 1783373708 | 3.65 VDC | 23.9 C | 1016.13 hPa | 0 | 0 |
| 1783372805 | 3.66 VDC | 24.2 C | 1016.75 hPa | 0 | 0 |
| 1783371902 | 3.66 VDC | 24.4 C | 1014.38 hPa | 0 | 0 |
| 1783370999 | 3.67 VDC | 24.8 C | 1016.88 hPa | 0 | 0 |
| 1783370520 | 3.67 VDC | 24.8 C | 1017.63 hPa | 0 | 0 |
| 1783369836 | 3.68 VDC | 25.1 C | 1015.5 hPa | 0 | 0 |
| 1783368933 | 3.69 VDC | 25.4 C | 1015.13 hPa | 0 | 0 |
| 1783368030 | 3.69 VDC | 25.7 C | 1015.5 hPa | 0 | 0 |
| 1783367127 | 3.7 VDC | 26 C | 1016 hPa | 0 | 0 |
| 1783366224 | 3.71 VDC | 26.4 C | 1016.13 hPa | 0 | 0 |
| 1783365321 | 3.71 VDC | 26.8 C | 1015.88 hPa | 0 | 0 |
| 1783364418 | 3.72 VDC | 27.3 C | 1015.25 hPa | 0 | 0 |
| 1783363515 | 3.73 VDC | 27.7 C | 1015.38 hPa | 0 | 0 |
| 1783362612 | 3.74 VDC | 28.2 C | 1015.5 hPa | 0 | 0 |
| 1783361709 | 3.75 VDC | 28.8 C | 1014.75 hPa | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)