This is the latest recevied telemetry packets stored in our database for station/object IV3CTT-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1767283932 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1767282731 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1767280330 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1767279130 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1767277929 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1767276729 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1767275528 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1767274328 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1767273128 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1767271927 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1767270727 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1767269526 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1767268326 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1767267126 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1767265925 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1767264725 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1767263523 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1767263167 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1767262975 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1767242664 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1767241464 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1767240264 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1767239064 | 3.72 VDC | 0 | 0 | 0 | 0 |
| 1767237863 | 3.81 VDC | 0 | 0 | 0 | 0 |
| 1767236663 | 3.9 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)