This is the latest recevied telemetry packets stored in our database for station/object IQ5VK-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762340030 | 14.5 VDC | 0 | 0 | 0 | 0 |
| 1762339130 | 14.92 VDC | 0 | 0 | 0 | 0 |
| 1762338229 | 14.98 VDC | 0 | 0 | 0 | 0 |
| 1762337329 | 14.98 VDC | 0 | 0 | 0 | 0 |
| 1762336429 | 14.98 VDC | 0 | 0 | 0 | 0 |
| 1762335529 | 14.98 VDC | 0 | 0 | 0 | 0 |
| 1762334629 | 15.02 VDC | 0 | 0 | 0 | 0 |
| 1762333729 | 14.98 VDC | 0 | 0 | 0 | 0 |
| 1762332829 | 14.98 VDC | 0 | 0 | 0 | 0 |
| 1762331929 | 15.04 VDC | 0 | 0 | 0 | 0 |
| 1762331028 | 15.04 VDC | 0 | 0 | 0 | 0 |
| 1762330128 | 15.04 VDC | 0 | 0 | 0 | 0 |
| 1762329228 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1762328320 | 15.04 VDC | 0 | 0 | 0 | 0 |
| 1762327413 | 14.96 VDC | 0 | 0 | 0 | 0 |
| 1762326506 | 14.78 VDC | 0 | 0 | 0 | 0 |
| 1762325599 | 14.5 VDC | 0 | 0 | 0 | 0 |
| 1762324693 | 13.46 VDC | 0 | 0 | 0 | 0 |
| 1762324029 | 13.16 VDC | 0 | 0 | 0 | 0 |
| 1762302349 | 11.76 VDC | 0 | 0 | 0 | 0 |
| 1762301442 | 11.9 VDC | 0 | 0 | 0 | 0 |
| 1762300535 | 11.94 VDC | 0 | 0 | 0 | 0 |
| 1762299628 | 11.96 VDC | 0 | 0 | 0 | 0 |
| 1762298724 | 11.94 VDC | 0 | 0 | 0 | 0 |
| 1762297817 | 12.02 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)