This is the latest recevied telemetry packets stored in our database for station/object IQ5VK-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779268608 | 15 VDC | 0 | 0 | 0 | 0 |
| 1779266808 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1779265008 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1779263208 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1779261408 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1779259609 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1779257808 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1779256008 | 15.06 VDC | 0 | 0 | 0 | 0 |
| 1779254208 | 14.1 VDC | 0 | 0 | 0 | 0 |
| 1779252408 | 12.98 VDC | 0 | 0 | 0 | 0 |
| 1779250608 | 12.98 VDC | 0 | 0 | 0 | 0 |
| 1779248808 | 13 VDC | 0 | 0 | 0 | 0 |
| 1779247008 | 13.06 VDC | 0 | 0 | 0 | 0 |
| 1779245207 | 13.06 VDC | 0 | 0 | 0 | 0 |
| 1779243407 | 13.02 VDC | 0 | 0 | 0 | 0 |
| 1779241607 | 13.12 VDC | 0 | 0 | 0 | 0 |
| 1779239807 | 13.14 VDC | 0 | 0 | 0 | 0 |
| 1779238042 | 13.14 VDC | 0 | 0 | 0 | 0 |
| 1779236242 | 13.08 VDC | 0 | 0 | 0 | 0 |
| 1779234442 | 13.1 VDC | 0 | 0 | 0 | 0 |
| 1779232642 | 13.2 VDC | 0 | 0 | 0 | 0 |
| 1779230842 | 13.22 VDC | 0 | 0 | 0 | 0 |
| 1779229042 | 13.24 VDC | 0 | 0 | 0 | 0 |
| 1779227241 | 13.24 VDC | 0 | 0 | 0 | 0 |
| 1779225441 | 13.24 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)