This is the latest recevied telemetry packets stored in our database for station/object MB7ULR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767166892 | 70 Count | 0 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1767163291 | 69 Count | 0 Count | 0 Count | 4 VDC | 0 VDC |
| 1767159690 | 68 Count | 0 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1767156089 | 67 Count | 0 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1767152488 | 66 Count | 0 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1767148888 | 65 Count | 0 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1767145287 | 64 Count | 0 Count | 0 Count | 4.05 VDC | 0 VDC |
| 1767141686 | 63 Count | 0 Count | 0 Count | 4 VDC | 0 VDC |
| 1767138085 | 62 Count | 0 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1767134484 | 61 Count | 0 Count | 0 Count | 3.95 VDC | 0 VDC |
| 1767130883 | 60 Count | 0 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1767127282 | 59 Count | 0 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1767123681 | 58 Count | 0 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1767120081 | 57 Count | 0 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1767116480 | 56 Count | 0 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767112879 | 55 Count | 0 Count | 0 Count | 4.03 VDC | 0 VDC |
| 1767109278 | 54 Count | 0 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1767105677 | 53 Count | 0 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1767102076 | 52 Count | 0 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1767098475 | 51 Count | 0 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1767094874 | 50 Count | 0 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1767091273 | 49 Count | 0 Count | 0 Count | 4 VDC | 0 VDC |
| 1767087673 | 48 Count | 0 Count | 0 Count | 4.05 VDC | 0 VDC |
| 1767084072 | 47 Count | 0 Count | 0 Count | 4.02 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)