This is the latest recevied telemetry packets stored in our database for station/object SQ3MQD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762368565 | 63 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762367665 | 62 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762366764 | 61 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762365863 | 60 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762364963 | 59 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762364062 | 58 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762363161 | 57 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762362260 | 56 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762361360 | 55 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762360459 | 54 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762359558 | 53 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762358658 | 52 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762357757 | 51 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762356856 | 50 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762355955 | 49 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762354154 | 47 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762353270 | 46 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762352369 | 45 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762351469 | 44 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762350568 | 43 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762349667 | 42 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762348766 | 41 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762347866 | 40 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762346965 | 39 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762346064 | 38 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)