This is the latest recevied telemetry packets stored in our database for station/object EB5CGD-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764090589 | 0 Count | 697 Count | 0 Count | 0 VDC | 0 VDC |
| 1764090038 | 0 Count | 697 Count | 0 Count | 0 VDC | 0 VDC |
| 1764089018 | 0 Count | 544 Count | 0 Count | 0 VDC | 0 VDC |
| 1764087998 | 0 Count | 410 Count | 0 Count | 0 VDC | 0 VDC |
| 1764086978 | 0 Count | 277 Count | 0 Count | 0 VDC | 0 VDC |
| 1764085958 | 0 Count | 133 Count | 0 Count | 0 VDC | 0 VDC |
| 1764084938 | 0 Count | 1030 Count | 0 Count | 0 VDC | 0 VDC |
| 1764083918 | 0 Count | 888 Count | 0 Count | 0 VDC | 0 VDC |
| 1764082898 | 0 Count | 739 Count | 0 Count | 0 VDC | 0 VDC |
| 1764082715 | 0 Count | 711 Count | 0 Count | 0 VDC | 0 VDC |
| 1764081695 | 0 Count | 565 Count | 0 Count | 0 VDC | 0 VDC |
| 1764080675 | 0 Count | 432 Count | 0 Count | 0 VDC | 0 VDC |
| 1764079655 | 0 Count | 287 Count | 0 Count | 0 VDC | 0 VDC |
| 1764078635 | 0 Count | 149 Count | 0 Count | 0 VDC | 0 VDC |
| 1764077614 | 0 Count | 1089 Count | 0 Count | 0 VDC | 0 VDC |
| 1764076594 | 0 Count | 944 Count | 0 Count | 0 VDC | 0 VDC |
| 1764075574 | 0 Count | 820 Count | 0 Count | 0 VDC | 0 VDC |
| 1764074554 | 0 Count | 679 Count | 0 Count | 0 VDC | 0 VDC |
| 1764073534 | 0 Count | 539 Count | 0 Count | 0 VDC | 0 VDC |
| 1764072514 | 0 Count | 392 Count | 0 Count | 0 VDC | 0 VDC |
| 1764071494 | 0 Count | 256 Count | 0 Count | 0 VDC | 0 VDC |
| 1764070474 | 0 Count | 121 Count | 0 Count | 0 VDC | 0 VDC |
| 1764069454 | 0 Count | 1127 Count | 0 Count | 0 VDC | 0 VDC |
| 1764068434 | 0 Count | 986 Count | 0 Count | 0 VDC | 0 VDC |
| 1764067414 | 0 Count | 842 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)