This is the latest recevied telemetry packets stored in our database for station/object SQ6IUS-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1755712540 | 4.17 VDC | 12.82 VDC | 0 | 0 | 0 |
| 1755711639 | 4.17 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1755710739 | 4.17 VDC | 12.86 VDC | 0 | 0 | 0 |
| 1755709839 | 4.17 VDC | 12.86 VDC | 0 | 0 | 0 |
| 1755708939 | 4.17 VDC | 12.88 VDC | 0 | 0 | 0 |
| 1755708039 | 4.17 VDC | 12.92 VDC | 0 | 0 | 0 |
| 1755707144 | 4.17 VDC | 12.9 VDC | 0 | 0 | 0 |
| 1755706239 | 4.17 VDC | 12.94 VDC | 0 | 0 | 0 |
| 1755705339 | 4.17 VDC | 13.18 VDC | 0 | 0 | 0 |
| 1755704439 | 4.17 VDC | 12.96 VDC | 0 | 0 | 0 |
| 1755703539 | 4.17 VDC | 13.06 VDC | 0 | 0 | 0 |
| 1755702639 | 4.17 VDC | 13.06 VDC | 0 | 0 | 0 |
| 1755701739 | 4.17 VDC | 13.04 VDC | 0 | 0 | 0 |
| 1755700838 | 4.17 VDC | 14.32 VDC | 0 | 0 | 0 |
| 1755699938 | 4.17 VDC | 14.3 VDC | 0 | 0 | 0 |
| 1755699038 | 4.17 VDC | 14.3 VDC | 0 | 0 | 0 |
| 1755698139 | 4.17 VDC | 13.22 VDC | 0 | 0 | 0 |
| 1755697238 | 4.17 VDC | 13.12 VDC | 0 | 0 | 0 |
| 1755696338 | 4.17 VDC | 14.2 VDC | 0 | 0 | 0 |
| 1755695438 | 4.17 VDC | 13.44 VDC | 0 | 0 | 0 |
| 1755694538 | 4.17 VDC | 13.38 VDC | 0 | 0 | 0 |
| 1755693638 | 4.17 VDC | 13.2 VDC | 0 | 0 | 0 |
| 1755692738 | 4.17 VDC | 13.24 VDC | 0 | 0 | 0 |
| 1755691838 | 4.17 VDC | 13.18 VDC | 0 | 0 | 0 |
| 1755690937 | 4.17 VDC | 13.24 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)