This is the latest recevied telemetry packets stored in our database for station/object S56BOT-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757125470 | 30 | 0 | 0 | 0 | 0 |
| 1757123649 | 29 | 0 | 0 | 0 | 0 |
| 1757121826 | 29 | 0 | 0 | 0 | 0 |
| 1757120005 | 29 | 0 | 0 | 0 | 0 |
| 1757118186 | 29 | 0 | 0 | 0 | 0 |
| 1757116364 | 29 | 0 | 0 | 0 | 0 |
| 1757114543 | 30 | 0 | 0 | 0 | 0 |
| 1757112723 | 30 | 0 | 0 | 0 | 0 |
| 1757110903 | 29 | 0 | 0 | 0 | 0 |
| 1757109085 | 29 | 0 | 0 | 0 | 0 |
| 1757107262 | 29 | 0 | 0 | 0 | 0 |
| 1757105442 | 30 | 0 | 0 | 0 | 0 |
| 1757103622 | 30 | 0 | 0 | 0 | 0 |
| 1757101801 | 29 | 0 | 0 | 0 | 0 |
| 1757099980 | 29 | 0 | 0 | 0 | 0 |
| 1757098158 | 28 | 0 | 0 | 0 | 0 |
| 1757096335 | 28 | 0 | 0 | 0 | 0 |
| 1757094514 | 28 | 0 | 0 | 0 | 0 |
| 1757092692 | 28 | 0 | 0 | 0 | 0 |
| 1757090870 | 28 | 0 | 0 | 0 | 0 |
| 1757089049 | 28 | 0 | 0 | 0 | 0 |
| 1757087230 | 30 | 0 | 0 | 0 | 0 |
| 1757085410 | 28 | 0 | 0 | 0 | 0 |
| 1757083591 | 28 | 0 | 0 | 0 | 0 |
| 1757081770 | 30 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)