This is the latest recevied telemetry packets stored in our database for station/object SR9VJK-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789234885 | 0 Count | 350 Count | 0 Count | 0 VDC | 0 VDC |
| 1789233085 | 0 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1789231286 | 0 Count | 103 Count | 0 Count | 0 VDC | 0 VDC |
| 1789229486 | 0 Count | 1022 Count | 0 Count | 0 VDC | 0 VDC |
| 1789227686 | 0 Count | 948 Count | 0 Count | 0 VDC | 0 VDC |
| 1789225886 | 0 Count | 823 Count | 0 Count | 0 VDC | 0 VDC |
| 1789224086 | 0 Count | 681 Count | 0 Count | 0 VDC | 0 VDC |
| 1789222285 | 0 Count | 547 Count | 0 Count | 0 VDC | 0 VDC |
| 1789220485 | 0 Count | 423 Count | 0 Count | 0 VDC | 0 VDC |
| 1789218685 | 0 Count | 301 Count | 0 Count | 0 VDC | 0 VDC |
| 1789216885 | 0 Count | 154 Count | 0 Count | 0 VDC | 0 VDC |
| 1789215085 | 0 Count | 1088 Count | 0 Count | 0 VDC | 0 VDC |
| 1789213285 | 0 Count | 969 Count | 0 Count | 0 VDC | 0 VDC |
| 1789211485 | 0 Count | 816 Count | 0 Count | 0 VDC | 0 VDC |
| 1789209685 | 0 Count | 736 Count | 0 Count | 0 VDC | 0 VDC |
| 1789207885 | 0 Count | 621 Count | 0 Count | 0 VDC | 0 VDC |
| 1789206085 | 0 Count | 493 Count | 0 Count | 0 VDC | 0 VDC |
| 1789204285 | 0 Count | 375 Count | 0 Count | 0 VDC | 0 VDC |
| 1789202485 | 0 Count | 279 Count | 0 Count | 0 VDC | 0 VDC |
| 1789200685 | 0 Count | 143 Count | 0 Count | 0 VDC | 0 VDC |
| 1789198885 | 0 Count | 1065 Count | 0 Count | 0 VDC | 0 VDC |
| 1789197084 | 0 Count | 916 Count | 0 Count | 0 VDC | 0 VDC |
| 1789195284 | 0 Count | 776 Count | 0 Count | 0 VDC | 0 VDC |
| 1789193484 | 0 Count | 675 Count | 0 Count | 0 VDC | 0 VDC |
| 1789191684 | 0 Count | 569 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)