This is the latest recevied telemetry packets stored in our database for station/object SR9VJK-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794220251 | 0 Count | 241 Count | 0 Count | 0 VDC | 0 VDC |
| 1794218451 | 0 Count | 146 Count | 0 Count | 0 VDC | 0 VDC |
| 1794216650 | 0 Count | 1089 Count | 0 Count | 0 VDC | 0 VDC |
| 1794214850 | 0 Count | 941 Count | 0 Count | 0 VDC | 0 VDC |
| 1794213050 | 0 Count | 764 Count | 0 Count | 0 VDC | 0 VDC |
| 1794211250 | 0 Count | 591 Count | 0 Count | 0 VDC | 0 VDC |
| 1794209449 | 0 Count | 427 Count | 0 Count | 0 VDC | 0 VDC |
| 1794207649 | 0 Count | 205 Count | 0 Count | 0 VDC | 0 VDC |
| 1794205849 | 0 Count | 1005 Count | 0 Count | 0 VDC | 0 VDC |
| 1794204049 | 0 Count | 836 Count | 0 Count | 0 VDC | 0 VDC |
| 1794202249 | 0 Count | 640 Count | 0 Count | 0 VDC | 0 VDC |
| 1794200449 | 0 Count | 385 Count | 0 Count | 0 VDC | 0 VDC |
| 1794198649 | 0 Count | 161 Count | 0 Count | 0 VDC | 0 VDC |
| 1794196849 | 0 Count | 1018 Count | 0 Count | 0 VDC | 0 VDC |
| 1794195049 | 0 Count | 905 Count | 0 Count | 0 VDC | 0 VDC |
| 1794193249 | 0 Count | 776 Count | 0 Count | 0 VDC | 0 VDC |
| 1794191449 | 0 Count | 649 Count | 0 Count | 0 VDC | 0 VDC |
| 1794168049 | 0 Count | 657 Count | 0 Count | 0 VDC | 0 VDC |
| 1794166249 | 0 Count | 518 Count | 0 Count | 0 VDC | 0 VDC |
| 1794164448 | 0 Count | 334 Count | 0 Count | 0 VDC | 0 VDC |
| 1794162648 | 0 Count | 166 Count | 0 Count | 0 VDC | 0 VDC |
| 1794160848 | 0 Count | 1059 Count | 0 Count | 0 VDC | 0 VDC |
| 1794159048 | 0 Count | 878 Count | 0 Count | 0 VDC | 0 VDC |
| 1794157248 | 0 Count | 788 Count | 0 Count | 0 VDC | 0 VDC |
| 1794155448 | 0 Count | 644 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)