This is the latest recevied telemetry packets stored in our database for station/object DF1IAN-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785057615 | 28.4 | 1015.63 | 0 | 0 | 0 |
| 1785048584 | 25.7 | 1012.63 | 0 | 0 | 0 |
| 1785042660 | 26.3 | 1014.5 | 0 | 0 | 0 |
| 1785033629 | 27.5 | 1016.5 | 0 | 0 | 0 |
| 1785024598 | 29 | 1015.38 | 0 | 0 | 0 |
| 1785016922 | 30.8 | 1008.63 | 0 | 0 | 0 |
| 1785008843 | 32.3 | 1013.63 | 0 | 0 | 0 |
| 1784999811 | 33.9 | 1010.5 | 0 | 0 | 0 |
| 1784997754 | 38 | 1008.5 | 0 | 0 | 0 |
| 1784997169 | 38.3 | 1012.63 | 0 | 0 | 0 |
| 1784995402 | 40 | 1014.88 | 0 | 0 | 0 |
| 1784995185 | 40.3 | 1012.75 | 0 | 0 | 0 |
| 1784994867 | 40.6 | 1015.5 | 0 | 0 | 0 |
| 1784994510 | 41.1 | 1012.5 | 0 | 0 | 0 |
| 1784994150 | 41.3 | 1012.38 | 0 | 0 | 0 |
| 1784989372 | 46.4 | 1008.88 | 0 | 0 | 0 |
| 1784983356 | 40.2 | 1009.88 | 0 | 0 | 0 |
| 1784983042 | 40 | 1012.63 | 0 | 0 | 0 |
| 1784980917 | 39.6 | 1010 | 0 | 0 | 0 |
| 1784980488 | 39.2 | 1008.75 | 0 | 0 | 0 |
| 1784979990 | 38.5 | 1012.13 | 0 | 0 | 0 |
| 1784979704 | 37.7 | 1012.5 | 0 | 0 | 0 |
| 1784976708 | 39.9 | 1010.75 | 0 | 0 | 0 |
| 1784976403 | 39.8 | 1009.88 | 0 | 0 | 0 |
| 1784976124 | 39.5 | 1011.25 | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)