This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751673844 | 18 Count | 247 Count | 0 Count | 3.65 VDC | 0.12 VDC |
| 1751672044 | 17 Count | 234 Count | 0 Count | 3.65 VDC | 0.12 VDC |
| 1751670245 | 16 Count | 221 Count | 0 Count | 3.65 VDC | 0.12 VDC |
| 1751668445 | 15 Count | 207 Count | 0 Count | 3.65 VDC | 0.12 VDC |
| 1751666645 | 14 Count | 194 Count | 0 Count | 3.65 VDC | 0.12 VDC |
| 1751664847 | 13 Count | 179 Count | 0 Count | 3.65 VDC | 0.12 VDC |
| 1751663046 | 12 Count | 166 Count | 0 Count | 3.65 VDC | 0.12 VDC |
| 1751661247 | 11 Count | 153 Count | 0 Count | 3.65 VDC | 0.12 VDC |
| 1751659447 | 10 Count | 140 Count | 0 Count | 3.65 VDC | 0.12 VDC |
| 1751657647 | 9 Count | 126 Count | 0 Count | 3.65 VDC | 0.12 VDC |
| 1751655848 | 8 Count | 112 Count | 0 Count | 3.65 VDC | 0.12 VDC |
| 1751654049 | 7 Count | 101 Count | 0 Count | 3.65 VDC | 0.12 VDC |
| 1751652250 | 6 Count | 90 Count | 0 Count | 3.65 VDC | 0.12 VDC |
| 1751650450 | 5 Count | 78 Count | 0 Count | 3.66 VDC | 0.12 VDC |
| 1751648651 | 4 Count | 66 Count | 0 Count | 3.66 VDC | 0.12 VDC |
| 1751646851 | 3 Count | 52 Count | 0 Count | 3.66 VDC | 0.12 VDC |
| 1751645051 | 2 Count | 40 Count | 0 Count | 3.66 VDC | 0.42 VDC |
| 1751643252 | 1 Count | 28 Count | 0 Count | 3.66 VDC | 1.3 VDC |
| 1751641452 | 0 Count | 14 Count | 0 Count | 3.66 VDC | 2.42 VDC |
| 1751639652 | 81 Count | 1002 Count | 0 Count | 3.66 VDC | 2.22 VDC |
| 1751637853 | 80 Count | 983 Count | 0 Count | 3.66 VDC | 1.6 VDC |
| 1751636053 | 79 Count | 964 Count | 0 Count | 3.66 VDC | 0.8 VDC |
| 1751634254 | 78 Count | 945 Count | 0 Count | 3.66 VDC | 2.18 VDC |
| 1751632455 | 77 Count | 924 Count | 0 Count | 3.66 VDC | 2.9 VDC |
| 1751630655 | 76 Count | 897 Count | 0 Count | 3.66 VDC | 2.68 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)