This is the latest recevied telemetry packets stored in our database for station/object HK6L-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1793231718 | 4 VDC | 3.66 VDC | 0 | 0 | 0 |
| 1793230817 | 3.99 VDC | 3.94 VDC | 0 | 0 | 0 |
| 1793229917 | 3.99 VDC | 3.84 VDC | 0 | 0 | 0 |
| 1793229010 | 3.99 VDC | 3.84 VDC | 0 | 0 | 0 |
| 1793228110 | 4 VDC | 3.76 VDC | 0 | 0 | 0 |
| 1793227209 | 3.97 VDC | 3.96 VDC | 0 | 0 | 0 |
| 1793226309 | 3.99 VDC | 3.88 VDC | 0 | 0 | 0 |
| 1793225408 | 3.97 VDC | 3.94 VDC | 0 | 0 | 0 |
| 1793224508 | 4 VDC | 3.92 VDC | 0 | 0 | 0 |
| 1793223608 | 4 VDC | 3.94 VDC | 0 | 0 | 0 |
| 1793222707 | 3.99 VDC | 3.96 VDC | 0 | 0 | 0 |
| 1793221807 | 3.99 VDC | 4.02 VDC | 0 | 0 | 0 |
| 1793220907 | 4.01 VDC | 4.18 VDC | 0 | 0 | 0 |
| 1793220006 | 4.01 VDC | 4.2 VDC | 0 | 0 | 0 |
| 1793219106 | 4 VDC | 4.1 VDC | 0 | 0 | 0 |
| 1793218206 | 3.96 VDC | 4.2 VDC | 0 | 0 | 0 |
| 1793217305 | 3.98 VDC | 4.12 VDC | 0 | 0 | 0 |
| 1793216405 | 3.99 VDC | 4.02 VDC | 0 | 0 | 0 |
| 1793215504 | 4.01 VDC | 4.16 VDC | 0 | 0 | 0 |
| 1793214603 | 4 VDC | 4.24 VDC | 0 | 0 | 0 |
| 1793213703 | 4.01 VDC | 4.12 VDC | 0 | 0 | 0 |
| 1793212802 | 4.02 VDC | 4.26 VDC | 0 | 0 | 0 |
| 1793211902 | 4 VDC | 4.26 VDC | 0 | 0 | 0 |
| 1793211001 | 3.98 VDC | 4.3 VDC | 0 | 0 | 0 |
| 1793210101 | 4.01 VDC | 4.3 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)