This is the latest recevied telemetry packets stored in our database for station/object S58W-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1747603760 | 4.17 VDC | 13 VDC | 0 | 0 | 0 |
| 1747602860 | 4.17 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1747601960 | 4.17 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1747601060 | 4.17 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1747600160 | 4.17 VDC | 13 VDC | 0 | 0 | 0 |
| 1747599260 | 4.17 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1747598360 | 4.17 VDC | 13 VDC | 0 | 0 | 0 |
| 1747597460 | 4.17 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1747596559 | 4.17 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1747595659 | 4.17 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1747594759 | 4.17 VDC | 13.04 VDC | 0 | 0 | 0 |
| 1747593859 | 4.17 VDC | 13.04 VDC | 0 | 0 | 0 |
| 1747592959 | 4.17 VDC | 13.08 VDC | 0 | 0 | 0 |
| 1747592058 | 4.17 VDC | 13.12 VDC | 0 | 0 | 0 |
| 1747591158 | 4.17 VDC | 13.2 VDC | 0 | 0 | 0 |
| 1747590258 | 4.17 VDC | 13.36 VDC | 0 | 0 | 0 |
| 1747589358 | 4.17 VDC | 13.66 VDC | 0 | 0 | 0 |
| 1747588458 | 4.17 VDC | 13.9 VDC | 0 | 0 | 0 |
| 1747587557 | 4.17 VDC | 13.94 VDC | 0 | 0 | 0 |
| 1747586657 | 4.17 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1747585756 | 4.17 VDC | 13.96 VDC | 0 | 0 | 0 |
| 1747584865 | 4.17 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1747583965 | 4.17 VDC | 13.96 VDC | 0 | 0 | 0 |
| 1747583065 | 4.17 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1747582164 | 4.17 VDC | 13.98 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)