This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767309331 | 123 Count | 160 Count | 106 Count | 4.01 VDC | 0 VDC |
| 1767307533 | 116 Count | 151 Count | 100 Count | 4.01 VDC | 0 VDC |
| 1767305737 | 109 Count | 143 Count | 94 Count | 4.01 VDC | 0 VDC |
| 1767303940 | 102 Count | 133 Count | 88 Count | 4.01 VDC | 0 VDC |
| 1767302143 | 94 Count | 122 Count | 81 Count | 4.01 VDC | 0 VDC |
| 1767300347 | 87 Count | 114 Count | 75 Count | 4.01 VDC | 0 VDC |
| 1767298550 | 80 Count | 107 Count | 69 Count | 4.01 VDC | 0 VDC |
| 1767296753 | 73 Count | 98 Count | 63 Count | 4.01 VDC | 0 VDC |
| 1767294955 | 67 Count | 91 Count | 58 Count | 4.01 VDC | 0 VDC |
| 1767293159 | 59 Count | 83 Count | 51 Count | 4.01 VDC | 0 VDC |
| 1767291361 | 52 Count | 74 Count | 45 Count | 4.01 VDC | 0 VDC |
| 1767289564 | 46 Count | 67 Count | 40 Count | 4.01 VDC | 0 VDC |
| 1767287768 | 40 Count | 60 Count | 35 Count | 4.01 VDC | 0 VDC |
| 1767285971 | 33 Count | 52 Count | 29 Count | 4.01 VDC | 0 VDC |
| 1767284173 | 26 Count | 42 Count | 23 Count | 4.01 VDC | 0 VDC |
| 1767282378 | 19 Count | 33 Count | 17 Count | 4.02 VDC | 0 VDC |
| 1767280581 | 12 Count | 24 Count | 11 Count | 4.02 VDC | 0 VDC |
| 1767278783 | 5 Count | 12 Count | 5 Count | 4.02 VDC | 0 VDC |
| 1767276985 | 611 Count | 1008 Count | 526 Count | 4.02 VDC | 0.46 VDC |
| 1767275191 | 604 Count | 996 Count | 520 Count | 4.02 VDC | 3.46 VDC |
| 1767273393 | 598 Count | 987 Count | 515 Count | 4.02 VDC | 4.38 VDC |
| 1767271596 | 593 Count | 981 Count | 511 Count | 4.02 VDC | 4.38 VDC |
| 1767269800 | 586 Count | 974 Count | 505 Count | 4.03 VDC | 4.36 VDC |
| 1767268004 | 580 Count | 968 Count | 500 Count | 4.03 VDC | 4.36 VDC |
| 1767266205 | 574 Count | 957 Count | 495 Count | 4.03 VDC | 4.36 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)