This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782997476 | 115 Count | 767 Count | 84 Count | 4.13 VDC | 5.6 VDC |
| 1782995677 | 111 Count | 733 Count | 81 Count | 4.13 VDC | 5.6 VDC |
| 1782993877 | 107 Count | 692 Count | 78 Count | 4.13 VDC | 5.6 VDC |
| 1782992078 | 103 Count | 647 Count | 75 Count | 4.13 VDC | 5.6 VDC |
| 1782990280 | 99 Count | 599 Count | 72 Count | 4.13 VDC | 5.6 VDC |
| 1782988480 | 95 Count | 553 Count | 69 Count | 4.14 VDC | 5.6 VDC |
| 1782986681 | 91 Count | 507 Count | 66 Count | 4.14 VDC | 5.6 VDC |
| 1782984882 | 87 Count | 459 Count | 63 Count | 4.14 VDC | 5.6 VDC |
| 1782983083 | 83 Count | 406 Count | 60 Count | 4.14 VDC | 5.58 VDC |
| 1782981284 | 79 Count | 361 Count | 57 Count | 4.15 VDC | 5.58 VDC |
| 1782979485 | 75 Count | 314 Count | 54 Count | 4.15 VDC | 5.6 VDC |
| 1782977687 | 72 Count | 272 Count | 52 Count | 4.15 VDC | 5.58 VDC |
| 1782975888 | 68 Count | 217 Count | 49 Count | 4.15 VDC | 5.58 VDC |
| 1782974087 | 64 Count | 137 Count | 46 Count | 4.19 VDC | 5.56 VDC |
| 1782972290 | 60 Count | 101 Count | 43 Count | 4.18 VDC | 5.56 VDC |
| 1782970492 | 56 Count | 96 Count | 40 Count | 4.16 VDC | 4.7 VDC |
| 1782968693 | 52 Count | 91 Count | 37 Count | 4.12 VDC | 4.56 VDC |
| 1782966895 | 49 Count | 87 Count | 35 Count | 4.08 VDC | 5.56 VDC |
| 1782965099 | 45 Count | 82 Count | 32 Count | 4.08 VDC | 4.42 VDC |
| 1782963298 | 37 Count | 77 Count | 29 Count | 4.06 VDC | 4.42 VDC |
| 1782961500 | 33 Count | 72 Count | 26 Count | 4.06 VDC | 4.42 VDC |
| 1782959702 | 29 Count | 67 Count | 23 Count | 4.06 VDC | 1.8 VDC |
| 1782957906 | 25 Count | 62 Count | 20 Count | 4.06 VDC | 0 VDC |
| 1782956107 | 20 Count | 39 Count | 16 Count | 4.06 VDC | 0 VDC |
| 1782954310 | 16 Count | 33 Count | 13 Count | 4.06 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)