This is the latest recevied telemetry packets stored in our database for station/object EA4ATS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767361300 | 11 Count | 958 Count | 0 Count | 0 VDC | 0 VDC |
| 1767359497 | 10 Count | 909 Count | 0 Count | 0 VDC | 0 VDC |
| 1767357728 | 9 Count | 875 Count | 0 Count | 0 VDC | 0 VDC |
| 1767355924 | 8 Count | 807 Count | 0 Count | 0 VDC | 0 VDC |
| 1767354121 | 7 Count | 741 Count | 0 Count | 0 VDC | 0 VDC |
| 1767352317 | 6 Count | 672 Count | 0 Count | 0 VDC | 0 VDC |
| 1767350514 | 5 Count | 556 Count | 0 Count | 0 VDC | 0 VDC |
| 1767348710 | 4 Count | 464 Count | 0 Count | 0 VDC | 0 VDC |
| 1767346907 | 3 Count | 360 Count | 0 Count | 0 VDC | 0 VDC |
| 1767345103 | 2 Count | 263 Count | 0 Count | 0 VDC | 0 VDC |
| 1767343300 | 1 Count | 167 Count | 0 Count | 0 VDC | 0 VDC |
| 1767341496 | 0 Count | 83 Count | 0 Count | 0 VDC | 0 VDC |
| 1767339727 | 15 Count | 1046 Count | 0 Count | 0 VDC | 0 VDC |
| 1767337923 | 14 Count | 954 Count | 0 Count | 0 VDC | 0 VDC |
| 1767336120 | 13 Count | 877 Count | 0 Count | 0 VDC | 0 VDC |
| 1767334316 | 12 Count | 779 Count | 0 Count | 0 VDC | 0 VDC |
| 1767332513 | 11 Count | 705 Count | 0 Count | 0 VDC | 0 VDC |
| 1767330709 | 10 Count | 619 Count | 0 Count | 0 VDC | 0 VDC |
| 1767328906 | 9 Count | 566 Count | 0 Count | 0 VDC | 0 VDC |
| 1767327103 | 8 Count | 518 Count | 0 Count | 0 VDC | 0 VDC |
| 1767325299 | 7 Count | 467 Count | 0 Count | 0 VDC | 0 VDC |
| 1767323496 | 6 Count | 409 Count | 0 Count | 0 VDC | 0 VDC |
| 1767321726 | 5 Count | 353 Count | 0 Count | 0 VDC | 0 VDC |
| 1767319923 | 4 Count | 297 Count | 0 Count | 0 VDC | 0 VDC |
| 1767318119 | 3 Count | 235 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)