This is the latest recevied telemetry packets stored in our database for station/object SP8AA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781222073 | 570 Count | 889 Count | 482 Count | 3.94 VDC | 0.14 VDC |
| 1781221164 | 568 Count | 884 Count | 481 Count | 3.95 VDC | 0.14 VDC |
| 1781220255 | 566 Count | 880 Count | 480 Count | 3.95 VDC | 0.14 VDC |
| 1781219351 | 561 Count | 873 Count | 476 Count | 3.96 VDC | 0.14 VDC |
| 1781218440 | 559 Count | 866 Count | 475 Count | 3.97 VDC | 0.14 VDC |
| 1781217535 | 555 Count | 858 Count | 472 Count | 3.98 VDC | 0.14 VDC |
| 1781216630 | 551 Count | 850 Count | 469 Count | 3.98 VDC | 0.14 VDC |
| 1781215724 | 546 Count | 833 Count | 465 Count | 3.99 VDC | 0.14 VDC |
| 1781214819 | 542 Count | 817 Count | 462 Count | 4 VDC | 0.14 VDC |
| 1781213004 | 530 Count | 788 Count | 452 Count | 4.02 VDC | 0.14 VDC |
| 1781211187 | 519 Count | 766 Count | 443 Count | 4.03 VDC | 0.14 VDC |
| 1781207724 | 498 Count | 738 Count | 430 Count | 4.06 VDC | 0.14 VDC |
| 1781206819 | 494 Count | 732 Count | 427 Count | 4.07 VDC | 0.14 VDC |
| 1781205909 | 492 Count | 726 Count | 426 Count | 4.07 VDC | 0.14 VDC |
| 1781205005 | 489 Count | 720 Count | 424 Count | 4.11 VDC | 0.14 VDC |
| 1781204094 | 487 Count | 713 Count | 423 Count | 4.08 VDC | 0.14 VDC |
| 1781202285 | 479 Count | 701 Count | 417 Count | 4.1 VDC | 0.14 VDC |
| 1781195936 | 390 Count | 596 Count | 335 Count | 4.17 VDC | 0.14 VDC |
| 1781194122 | 379 Count | 579 Count | 326 Count | 4.17 VDC | 0.14 VDC |
| 1781193218 | 375 Count | 569 Count | 323 Count | 4.21 VDC | 0.14 VDC |
| 1781192313 | 371 Count | 559 Count | 320 Count | 4.21 VDC | 0.14 VDC |
| 1781191402 | 364 Count | 545 Count | 314 Count | 4.2 VDC | 0.14 VDC |
| 1781189583 | 349 Count | 523 Count | 301 Count | 4.2 VDC | 0.14 VDC |
| 1781188853 | 341 Count | 512 Count | 298 Count | 4.2 VDC | 0.14 VDC |
| 1781187947 | 337 Count | 504 Count | 295 Count | 4.13 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)