This is the latest recevied telemetry packets stored in our database for station/object SP9WJ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | current* | temp* | humidity* | v batt* | v cpu* |
|---|---|---|---|---|---|
| 1743553510 | 1.33 mA | 6 C | 97 % | 1.53 V | 3.26 V |
| 1743552898 | 1.27 mA | 7 C | 95 % | 1.53 V | 3.26 V |
| 1743552287 | 1.16 mA | 7 C | 93 % | 1.51 V | 3.26 V |
| 1743551675 | 1.32 mA | 7 C | 90 % | 1.51 V | 3.26 V |
| 1743551065 | 1.4 mA | 8 C | 88 % | 1.51 V | 3.26 V |
| 1743550454 | 1.22 mA | 8 C | 88 % | 1.51 V | 3.26 V |
| 1743549844 | 0.88 mA | 8 C | 88 % | 1.51 V | 3.26 V |
| 1743548623 | 1.15 mA | 8 C | 89 % | 1.53 V | 3.26 V |
| 1743548013 | 0.86 mA | 8 C | 89 % | 1.53 V | 3.26 V |
| 1743547403 | 1.41 mA | 8 C | 89 % | 1.55 V | 3.26 V |
| 1743546793 | 1.73 mA | 8 C | 91 % | 1.58 V | 3.28 V |
| 1743546182 | 0.88 mA | 8 C | 92 % | 1.58 V | 3.26 V |
| 1743545572 | 1.18 mA | 8 C | 93 % | 1.6 V | 3.26 V |
| 1743544962 | 1.21 mA | 7 C | 95 % | 1.62 V | 3.28 V |
| 1743544350 | 1 mA | 7 C | 98 % | 1.65 V | 3.26 V |
| 1743543739 | 1.22 mA | 7 C | 99 % | 1.62 V | 3.26 V |
| 1743543127 | 1.11 mA | 6 C | 99 % | 1.62 V | 3.26 V |
| 1743542514 | 1 mA | 6 C | 99 % | 1.62 V | 3.26 V |
| 1743541902 | 1.96 mA | 6 C | 99 % | 1.6 V | 3.26 V |
| 1743541289 | 1.05 mA | 6 C | 99 % | 1.6 V | 3.26 V |
| 1743540064 | 1.19 mA | 6 C | 99 % | 1.58 V | 3.26 V |
| 1743539451 | 0.89 mA | 6 C | 99 % | 1.58 V | 3.26 V |
| 1743538225 | 1.41 mA | 6 C | 99 % | 1.53 V | 3.26 V |
| 1743537612 | 1.33 mA | 6 C | 97 % | 1.53 V | 3.26 V |
| 1743536388 | 1.6 mA | 6 C | 95 % | 1.51 V | 3.26 V |
*Used Equation Coefficients:
current: 0, 0.01569, 0
temp: 0, 1, -128
humidity: 0, 1, 0
v batt: 0, 0.02353, 0
v cpu: 0, 0.01569, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)