This is the latest recevied telemetry packets stored in our database for station/object SP6OOL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757855271 | 159 Count | 834 Count | 0 Count | 4.64 VDC | 0 VDC |
| 1757854370 | 158 Count | 823 Count | 0 Count | 4.64 VDC | 0 VDC |
| 1757853469 | 157 Count | 819 Count | 0 Count | 4.5 VDC | 0 VDC |
| 1757852569 | 156 Count | 818 Count | 0 Count | 4.64 VDC | 0 VDC |
| 1757851668 | 155 Count | 815 Count | 0 Count | 4.59 VDC | 0 VDC |
| 1757850767 | 154 Count | 813 Count | 0 Count | 4.58 VDC | 0 VDC |
| 1757849867 | 153 Count | 796 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1757848981 | 152 Count | 788 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1757848080 | 151 Count | 780 Count | 0 Count | 4.38 VDC | 0 VDC |
| 1757847179 | 150 Count | 772 Count | 0 Count | 4.47 VDC | 0 VDC |
| 1757846279 | 149 Count | 763 Count | 0 Count | 4.54 VDC | 0 VDC |
| 1757845378 | 148 Count | 762 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1757844477 | 147 Count | 760 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1757843577 | 146 Count | 759 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1757842676 | 145 Count | 757 Count | 0 Count | 4.56 VDC | 0 VDC |
| 1757841775 | 144 Count | 756 Count | 0 Count | 4.73 VDC | 0 VDC |
| 1757840875 | 143 Count | 754 Count | 0 Count | 4.57 VDC | 0 VDC |
| 1757839974 | 142 Count | 753 Count | 0 Count | 4.76 VDC | 0 VDC |
| 1757839073 | 141 Count | 751 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1757838173 | 140 Count | 749 Count | 0 Count | 4.44 VDC | 0 VDC |
| 1757837272 | 139 Count | 747 Count | 0 Count | 4.49 VDC | 0 VDC |
| 1757836372 | 138 Count | 746 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1757835471 | 137 Count | 744 Count | 0 Count | 4.61 VDC | 0 VDC |
| 1757834570 | 136 Count | 742 Count | 0 Count | 4.75 VDC | 0 VDC |
| 1757833670 | 135 Count | 739 Count | 0 Count | 4.29 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)