This is the latest recevied telemetry packets stored in our database for station/object SP6OOL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
---|---|---|---|---|---|
1760594058 | 296 Count | 884 Count | 0 Count | 4.24 VDC | 0 VDC |
1760593158 | 295 Count | 881 Count | 0 Count | 4.12 VDC | 0 VDC |
1760592272 | 294 Count | 874 Count | 0 Count | 4.11 VDC | 0 VDC |
1760591371 | 293 Count | 873 Count | 0 Count | 4.73 VDC | 0 VDC |
1760590471 | 292 Count | 871 Count | 0 Count | 4.34 VDC | 0 VDC |
1760589570 | 291 Count | 869 Count | 0 Count | 4.27 VDC | 0 VDC |
1760588669 | 290 Count | 867 Count | 0 Count | 4.57 VDC | 0 VDC |
1760587769 | 289 Count | 866 Count | 0 Count | 4.74 VDC | 0 VDC |
1760586868 | 288 Count | 864 Count | 0 Count | 4.53 VDC | 0 VDC |
1760585968 | 287 Count | 863 Count | 0 Count | 4.21 VDC | 0 VDC |
1760585067 | 286 Count | 861 Count | 0 Count | 4.39 VDC | 0 VDC |
1760584166 | 285 Count | 860 Count | 0 Count | 4.5 VDC | 0 VDC |
1760583266 | 284 Count | 858 Count | 0 Count | 4.76 VDC | 0 VDC |
1760582365 | 283 Count | 857 Count | 0 Count | 4.59 VDC | 0 VDC |
1760581465 | 282 Count | 854 Count | 0 Count | 4.21 VDC | 0 VDC |
1760580564 | 281 Count | 853 Count | 0 Count | 4.6 VDC | 0 VDC |
1760579663 | 280 Count | 851 Count | 0 Count | 4.4 VDC | 0 VDC |
1760578763 | 279 Count | 850 Count | 0 Count | 4.18 VDC | 0 VDC |
1760577862 | 278 Count | 848 Count | 0 Count | 4.32 VDC | 0 VDC |
1760576962 | 277 Count | 848 Count | 0 Count | 4.5 VDC | 0 VDC |
1760576061 | 276 Count | 847 Count | 0 Count | 4.3 VDC | 0 VDC |
1760575160 | 275 Count | 847 Count | 0 Count | 4.22 VDC | 0 VDC |
1760574259 | 274 Count | 845 Count | 0 Count | 4.5 VDC | 0 VDC |
1760573359 | 273 Count | 844 Count | 0 Count | 4.52 VDC | 0 VDC |
1760572458 | 272 Count | 842 Count | 0 Count | 4.36 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)