This is the latest recevied telemetry packets stored in our database for station/object SP2UUU-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789243078 | 263 Count | 371 Count | 263 Count | 4.19 VDC | 0.18 VDC |
| 1789188593 | 263 Count | 371 Count | 263 Count | 4.21 VDC | 0.2 VDC |
| 1789186793 | 261 Count | 368 Count | 261 Count | 4.21 VDC | 0.2 VDC |
| 1789184992 | 259 Count | 366 Count | 259 Count | 4.19 VDC | 0.2 VDC |
| 1789183192 | 258 Count | 365 Count | 258 Count | 4.2 VDC | 0.2 VDC |
| 1789181392 | 256 Count | 363 Count | 256 Count | 4.17 VDC | 0.2 VDC |
| 1789179592 | 255 Count | 362 Count | 255 Count | 4.17 VDC | 0.2 VDC |
| 1789177793 | 251 Count | 358 Count | 251 Count | 4.19 VDC | 0.2 VDC |
| 1789175993 | 247 Count | 354 Count | 247 Count | 4.18 VDC | 0.2 VDC |
| 1789174193 | 246 Count | 353 Count | 246 Count | 4.19 VDC | 0.18 VDC |
| 1789172393 | 245 Count | 352 Count | 245 Count | 4.18 VDC | 0.2 VDC |
| 1789170592 | 244 Count | 351 Count | 244 Count | 4.19 VDC | 0.18 VDC |
| 1789168792 | 243 Count | 350 Count | 243 Count | 4.16 VDC | 0.2 VDC |
| 1789166992 | 242 Count | 349 Count | 242 Count | 4.16 VDC | 0.2 VDC |
| 1789165192 | 240 Count | 347 Count | 240 Count | 4.21 VDC | 0.2 VDC |
| 1789163392 | 239 Count | 346 Count | 239 Count | 4.17 VDC | 0.2 VDC |
| 1789161592 | 238 Count | 345 Count | 238 Count | 4.16 VDC | 0.18 VDC |
| 1789159792 | 236 Count | 343 Count | 236 Count | 4.19 VDC | 0.18 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)