This is the latest recevied telemetry packets stored in our database for station/object SQ9P-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | current* | temp* | humidity* | v batt* | v cpu* |
---|---|---|---|---|---|
1726763387 | 2.62 mA | 12 C | 99 % | 0.05 V | 3.59 V |
1726761532 | 2.29 mA | 12 C | 99 % | 0.05 V | 3.59 V |
1726760605 | 1.63 mA | 12 C | 99 % | 0.05 V | 3.59 V |
1726759683 | 2.73 mA | 12 C | 99 % | 0.05 V | 3.59 V |
1726756895 | 2.37 mA | 12 C | 99 % | 0.05 V | 3.58 V |
1726755968 | 3.03 mA | 12 C | 99 % | 0.05 V | 3.58 V |
1726755041 | 1.74 mA | 12 C | 99 % | 0.05 V | 3.56 V |
1726754113 | 1.69 mA | 12 C | 99 % | 0.07 V | 3.56 V |
1726753191 | 1.85 mA | 12 C | 99 % | 0.05 V | 3.58 V |
1726752258 | 1.93 mA | 12 C | 99 % | 0.05 V | 3.59 V |
1726750403 | 1.87 mA | 13 C | 99 % | 0.07 V | 3.59 V |
1726749476 | 2.12 mA | 13 C | 99 % | 0.05 V | 3.58 V |
1726748548 | 2.31 mA | 12 C | 99 % | 0.05 V | 3.58 V |
1726745764 | 4 mA | 14 C | 99 % | 0.07 V | 3.56 V |
1726743909 | 3.09 mA | 13 C | 100 % | 0.07 V | 3.59 V |
1726742981 | 3.86 mA | 13 C | 100 % | 0.07 V | 3.58 V |
1726742053 | 3.09 mA | 13 C | 100 % | 0.07 V | 3.58 V |
1726741125 | 2.93 mA | 13 C | 100 % | 0.05 V | 3.58 V |
1726740198 | 2.56 mA | 12 C | 100 % | 0.05 V | 3.58 V |
1726736488 | 2.73 mA | 11 C | 100 % | 0.05 V | 3.58 V |
1726735561 | 2.24 mA | 11 C | 100 % | 0.05 V | 3.58 V |
1726733707 | 1.26 mA | 12 C | 100 % | 0.05 V | 3.59 V |
1726732780 | 1.18 mA | 12 C | 100 % | 0.05 V | 3.59 V |
1726731853 | 1.35 mA | 11 C | 100 % | 0.05 V | 3.59 V |
1726730926 | 1.16 mA | 11 C | 100 % | 0.05 V | 3.59 V |
*Used Equation Coefficients:
current: 0, 0.01569, 0
temp: 0, 1, -128
humidity: 0, 1, 0
v batt: 0, 0.02353, 0
v cpu: 0, 0.01569, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)