This is the latest recevied telemetry packets stored in our database for station/object EA2EZA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789248104 | 4.04 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789244502 | 4.06 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1789240902 | 4.1 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789237299 | 4.15 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789236862 | 4.15 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789231477 | 4.21 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789227877 | 4.16 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789224276 | 4.17 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789220676 | 4.17 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789217076 | 4.18 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789213476 | 4.21 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789209875 | 4.14 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789206273 | 3.96 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789206243 | 3.96 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789206213 | 3.96 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789206138 | 3.94 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789192049 | 3.79 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789192013 | 3.81 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1789189181 | 3.82 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1789185580 | 3.84 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1789181980 | 3.86 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1789178380 | 3.87 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1789174780 | 3.9 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1789171179 | 3.89 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1789167579 | 3.93 VDC | 0.66 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)