This is the latest recevied telemetry packets stored in our database for station/object IW2EJH-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762353512 | 4.07 VDC | 1.06 VDC | 0 | 0 | 0 |
| 1762351712 | 4.08 VDC | 2.72 VDC | 0 | 0 | 0 |
| 1762349912 | 4.1 VDC | 2.9 VDC | 0 | 0 | 0 |
| 1762348112 | 4.2 VDC | 2.72 VDC | 0 | 0 | 0 |
| 1762346312 | 4.16 VDC | 3.24 VDC | 0 | 0 | 0 |
| 1762344512 | 4.19 VDC | 2.6 VDC | 0 | 0 | 0 |
| 1762342712 | 4.17 VDC | 1.98 VDC | 0 | 0 | 0 |
| 1762340911 | 4.16 VDC | 2.5 VDC | 0 | 0 | 0 |
| 1762339111 | 4.15 VDC | 2.24 VDC | 0 | 0 | 0 |
| 1762337311 | 4.11 VDC | 2.06 VDC | 0 | 0 | 0 |
| 1762335511 | 4.08 VDC | 2.28 VDC | 0 | 0 | 0 |
| 1762333695 | 3.95 VDC | 1.4 VDC | 0 | 0 | 0 |
| 1762331920 | 3.86 VDC | 1.48 VDC | 0 | 0 | 0 |
| 1762330120 | 3.84 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1762328320 | 3.83 VDC | 1.94 VDC | 0 | 0 | 0 |
| 1762326522 | 3.81 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1762324720 | 3.8 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1762322920 | 3.83 VDC | 1.12 VDC | 0 | 0 | 0 |
| 1762321120 | 3.83 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1762319320 | 3.84 VDC | 1.08 VDC | 0 | 0 | 0 |
| 1762317520 | 3.85 VDC | 1.08 VDC | 0 | 0 | 0 |
| 1762315720 | 3.85 VDC | 1.08 VDC | 0 | 0 | 0 |
| 1762313920 | 3.85 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1762312120 | 3.85 VDC | 1.12 VDC | 0 | 0 | 0 |
| 1762310320 | 3.84 VDC | 1.04 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)